Our certified mechanics come to you · Get a fair and transparent estimate upfront
P0552 is a diagnostic trouble code (DTC) for "Power Steering Pressure Sensor Circuit Low Input". This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform theCheck Engine Light diagnosticfor $114.99. Once we are able to diagnose the problem, you will be provided with an upfront quote for the recommended fix and receive $20.0 off as a credit towards the repair. All our repairs are backed by our 12-month / 12,000-mile warranty.
If the PCM has picked up on an issue with your vehicle’spower steering pressure sensor circuit, a code P0552 will be stored. This code is often stored along with P0551 and others related to power steering.
Your vehicle’s PCM is able to keep tabs on the power steering pressure sensor because the latter sends it regular voltage inputs. The same goes for the steering angle sensor input signal. The PCM compares the two and, so long as they’re proportionate, there is no issue.
However, if the PCM calculates that the two are not in accord, it will store the P0552 code. Generally, it is more likely to happen when you’re driving around at low speeds.
In a lot of vehicles, the problem has to happen more than once before the P0522 code is registered. If it only happens once, that initial mishap is simply considered a “pending code.”
The same also goes for theCheck Engine Light. Many vehicles are designed not to trigger this light until two or more failure cycles have occurred.
There are a handful of reasons your vehicle’s PCN may have stored P0552 code:
The P0552 code may be associated with a number of symptoms. Your power steering could actually leak fluid. When traveling at low speeds, you could find that your engine all of a sudden stalls. Most will also notice that their fuel efficiency begins to lack.
It should be noted that, sometimes, the driver actually won’t have any adverse symptoms to report. As we mentioned above, the Check Engine Light may not even come on.
Your mechanic will begin by using an OBD-II scanner to access your PCM and see which codes have been stored. After that, they’ll most likely go to work by inspecting all the wires and connectors involved with your vehicle’s power steering. Fuses may need to be examined as well.
Moving on, the mechanic will check to see if the power steering works correctly. They’ll look forleakagesand confirm that the power steering fluid is clean.
A lot of mechanics make the mistake of blaming the idle air control system for code P0552. As a result, they replace it, which turns out to be completely unnecessary. The mistake is made because many of the aforementioned causes the engine to stall out at low speeds.
The good news is that this code doesn’t represent anything that should have you too worried. You most likely won’t be getting in a serious accident because your vehicle stalls at low RPMs, for example.
That being said, the bad news is that your vehicle really won’t work correctly until you get this issue addressed. In that way, it’s very important you get this code fixed ASAP.
Seeing as how a faulty power steering pressure sensor is usually to blame, your mechanic will most likely replace yours and that will be the end of it. Otherwise, they may:
Even though symptoms may be tolerable, the reasons for them can worsen, so it’s best to just have a mechanic repair this problem immediately.
If your vehicle has stored a P0552 and you want it fixed right away, YourMechanic is here to help.You can fill out this online form to receive a free quoteand set a time for one of our certified mobile mechanics to come repair your vehicle. Otherwise, just call 1-800-701-6230 and one of our service advisors will take your information.
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
