梅赛德斯 - 奔驰CLK500汽车恒温器在您的家庭或办公室更换。

力学如何更换发万博亚洲客户端动机冷却系统恒温器？

• 一旦发动机完全冷，就会松开散热器盖，并从散热器中排出足够的冷却液，因此冷却液水平在恒温器外壳下方。
• The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
• All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
• The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
• The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
• 运行汽车发动机，直到达到正常的工作温度为止，在使用热冷却液采取预防措施时，冷却液水平会重新检查，同时确认流过散热器的流动 - 视觉上或使用红外温度枪。这将确认恒温器是打开的。最后，检查发动机是否泄漏。