A parking brake is both a safety feature and a necessity in many parts of the world.停车制动器are used to secure the vehicle, preventing it from moving or rolling away when the car is parked. Many different things can cause the parking brake to loose its grip or失败completely.
如果您注意到制动杆需要多次拉动或在接合之前单击多次，则可能需要调整车辆中的驻车制动电缆。如果您的驻车制动器处于良好的工作状态，但不像以前那样坚持，请遵循本文中给出的步骤调整驻车制动器。
- 笔记：本文涵盖了具有杠杆类型参与的驻车制动器的调整方法。您的车辆可能具有不同的刹车，涉及的零件可能只是不同的位置，但是调整过程将相似。
第3部分，共3部分：找到驻车制动电缆调节器
需要的材料
Step 1: Check the parking brake clicks。Slowly pull up on the parking brake and feel the engagement point.
计算刹车紧密之前所需的点击次数。
将点击次数与所有者手册建议的数字进行比较。
步骤2：找到驻车制动杆靴。安装在中央控制台上的驻车制动杆在制动杆周围包含靴子。
在此靴子下，您会发现停车制动器的工作。
- 笔记: Some cars may have a different procedure to access the adjuster and additional components in the console may need to be removed on your specific vehicle.
使用塑料撬工具轻轻撬起靴子的边缘。抬起启动，直到您可以查看调节螺栓。
Park 2 of 3: Adjust the parking brake
步骤1：调整停车制动器。The adjustment bolt will be located on the parking brake lever. This bolt tightens thecableleading to the rear brakes.
将螺栓拧紧几回合，然后检查驻车制动电缆。通过拉动杠杆并感到紧身来检查制动器。继续拧紧螺栓，直到达到适当的紧绷度。
第3部分的第3部分：检查最终操作
步骤1：将制动杆靴子放回原处。Once the parking brake cable is adjusted to a satisfactory level, put the parking brake lever boot back into its original location.
如果需要，重新安装了被删除的任何其他零件，以访问驻车制动器组件。
步骤2：检查停车制动器的操作。To check the parking brake operation engage the parking brake and place the transmission in neutral. It should be tight at this point.
Exit the vehicle and go to the front of the vehicle. Gently push back on the car, it should not move at all with the brake engaged.
Now that your parking brake is adjusted, you can safely park on hills with the knowledge that your vehicle will not roll down hill when you leave it.
If you find that your parking brake is卡住or if it does not发布，从Mymechanic中获得认证的机械师为您进行检查。万博体育入口
