问:轿车保持需要跳开始坐在后一到两天

Pep男孩可能是在这里作为一个下水道,但他们可能没有技术或设备来检测它。那么你可以(控制区域网络)不睡觉。”The can is the line of communication between the control modules on your car and it stays on for about 30 seconds after the last person gets out of the car and closes or locks the door. The modules will draw about 400 MA from the battery until the Can goes to sleep at which point the draw drops to about 100 MA. (milliamps) Any draw over 200 MA with everything off is too much. Failure of the CAN to sleep can be caused by any switch like a door, hood or trunk not being off, or by a bad control module or even a low battery. Any signal from a remote will activate the CAN. I’ve seen cases where car owners would allow their toddler to play with the car keys and their repeated pushing of buttons would continually reactivate the can on the car in the garage and run the battery down. Your car needs to be checked out by someone who is well acquainted with the electronic systems on a VW. You can contact Your Mechanic to have a qualified technician come to your home or office to看看你的电池消耗和让你知道什么是解决方案。