Driving a car that pulls to one side is not only inconvenient, but it is also very dangerous. Maintaining constant pressure on the steering wheel to keep the car going straight is tiring and can pull your focus off the road. Plus, it can be very hard on your tires.
\n\nA pull to one side can be caused by a wide variety of issues -- everything from an underinflated tire to failed suspension parts.
\n\nUneven Tire Pressure
\n\nUneven tire pressure is a very common reason for a car to pull to one side. Lower pressure on one side changes the height of the tire, which causes the alignment to change. This is especially true if you have an underinflated rear tire. If the tire is underinflated, it will have increased rolling resistance which will make the pull to one side much more noticeable.
\n\nOver inflated tires are just as bad. This condition will also cause the alignment to change. An overinflated tire will cause the vehicle to push away from that tire, also creating abnormal tire wear.
\n\nYou can see this in two ways:
\n\nThis is an easy fix: head to the local gas station and inflate all tires to their proper pressure. Tire pressure stipulations can usually be found on the driver\u2019s side door jam. The optimal pressure is on a sticker. After you have inflated the tires back to their specifications, drive the vehicle to verify the pull is now gone.
\n\nWheel Alignment
\n\nAnother common cause of a car pulling to the side is a wheel that is out of alignment. Another symptom of misaligned wheels is uneven tread wear. Out-of-alignment wheels will quickly wear down and can lead to more serious issues if not addressed. You should have your vehicle aligned as soon as possible if this is the root cause of the pulling.
\n\nAlignment is not an adjustment of the wheels or tires, but of the suspension. A mechanic will adjust the suspension so that the angle of the tires is optimized and the tires make contact with the road according to the manufacturer specifications.
\n\nBrake Issues: Stuck Caliper, Collapsed Brake Hose, Unlubricated Slide Pins
\n\nIssues with the brake system can cause a vehicle to pull to one side. One of the most common brake issues is a stuck caliper. Brake calipers are powered by the hydraulic brake system and apply pressure to the brake pads to bring the car to a stop. If one of the calipers is stuck, the car will pull to that side.
\n\nOther brake issues that cause a car to pull include a collapsed brake hose, or slide pins that are in need of lubrication. Brake issues should be dealt with by a professional, as the braking system is a critical safety component of your car.
\n\nBad Wheel Bearing
\n\nIf you have a bad wheel bearing, there will probably be more serious symptoms present, but pulling to one side is also a warning sign.
\n\nWheel bearings allow the friction-free rotation of the wheel hub assembly, providing smooth wheel rotation.
\n\nThere are four wheel bearings on a vehicle, one at each wheel. When a wheel bearing wears out you will hear a grinding noise from the tire area, the steering wheel will sometimes shake, and the car will possibly pull to one side if it is starting to seize. This latter symptom often occurs long after you start hearing the grinding noise.
\n\nYou should not drive your vehicle in this condition. Contact a mechanic immediately. Replacing a wheel bearing is a complicated repair and should be done by a professional.
\n\nWorn Suspension Components
\n\nAt some point in your vehicle\u2019s lifetime, most of the suspension will need replacing. Whether it is shocks or struts, ball joints, control arms or bushings, all the components wear out over time. As they become worn, they will often shift or lean to one side, especially during braking, which causes the car to pull to that side.
\n\nFor example, a worn-out control arm bushing will shift when the brakes are applied, causing the vehicle to pull sharply to that side. Suspension parts tend to wear out slowly, so it is possible that you may not notice until they actually break.
\n\nThe suspension is a key component of your car\u2019s safety system and you should not drive it with broken or worn parts. An annual inspection of your suspension can help avoid surprises.
\n\nWorn Steering Linkage
\n\nA weak tie rod end will cause the steering wheel to shift to one side or the other while turning. If it gets extremely bad, the steering wheel could shake violently from side to side. Newer vehicles use a rack-and-pinion system that can sometimes be serviced. Older vehicles use a steering box and linkage system that is serviceable.
\n\nA broken or severely damaged steering linkage is extremely dangerous, as it could result in loss of control of the steering wheel. If you suspect any of these symptoms, have your car checked by a mechanic.
\n\nTorque Steer
\n\nTorque steer is when the car pulls to one side as the car initially accelerates. There can be several causes of this condition. Sometimes, loose steering components are the culprit. Other times, a broken motor mount is the cause. Too much slack in a tie rod, a failing lower control-arm bushing, or a ball joint with excess movement can all cause this problem.
\n\nYou can test for this problem by putting your car in neutral and coasting it down the street. If the pull does not happen when coasting, your alignment is probably not the problem and torque steer could be the source of the issue.
\n\nA top-rated mobile mechanic will come to your home or office to determine the cause and source of the pulling issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.
\n\nA car is not safe to operate under conditions where it is pulling to one side. Regardless of whether it is a brake issue, suspension issue, or a bad wheel bearing, these repairs require the expertise of a professional. Book a mechanic to perform a thorough inspection as soon as possible.
\n我们认证的移动力学每周7天到你7点和9点之万博亚洲客户端间。
诊断是如何工作的
立即预订注册移动机械来找你
机械诊断问题并引用必要的维修
你的车准备好了
公平的,前期为所有服务和透明的价格manbetx体育手机manbet1
我们的认证移动力学现在可以来找你。万博亚洲客户端
开车,拉到一边不仅不方便,但是它也很危险。保持恒定的压力继续汽车方向盘直是累人的,可以把你的注意力。另外,它可以很难在你的轮胎。
拉到一边可以引起各种各样的问题——从一个充气不足的轮胎没有悬挂部件。
轮胎压力不均匀
轮胎压力不均一辆汽车是一种很常见的理由拉到一边。低压一侧轮胎的高度变化,导致改变的对齐。特别是如果你有一个充气不足的后胎。如果充气不足的轮胎,它将增加滚动阻力将使拉到一边更明显。
充气轮胎是一样糟糕。这种情况也会导致一致性变化。一个特大的轮胎会造成轮胎的车辆将远离,也造成轮胎异常磨损。
你可以看到这在两个方面:
这是一个简单的解决办法:前往当地的加油站和充气轮胎适当的压力。轮胎压力规定通常可以发现司机的侧门果酱。最优压力贴纸。充气轮胎之后回到他们的规格,驱动车辆验证拉现在不见了。
前轮定位
车拉到一边的另一个常见原因是轮失准。错位的轮子的另一个症状是胎面磨损不均匀。失准的轮子很快就会磨损,会导致更严重的问题如果不解决。你应该把你的车一致尽快如果这是拉的根源。
调整不是一个调整车轮或轮胎,但暂停。机械将调整悬架轮胎优化的角度和轮胎接触道路根据制造商的规格。
刹车问题:卡尺,倒塌的制动软管,Unlubricated滑针
制动系统的问题会导致车辆拉到一边。最常见的一种制动问题是一个卡尺。刹车卡钳是由液压制动系统和施加压力的刹车片把车停了下来。如果其中一个卡尺卡,车拉到一边。
其他制动问题导致一辆车将包括一个倒塌的制动软管、或滑针需要润滑。刹车问题应该由专业处理,制动系统是一个关键的安全组件的你的车。
坏的车轮轴承
如果你有一个坏的车轮轴承,可能会有更严重的症状,但拉到一边也是一个警告信号。
轮轴承允许轮毂总成的无摩擦旋转,提供光滑轮旋转。
汽车有四个轮子轴承,一个在每个轮子。当车轮轴承磨穿你会听到一个声音从轮胎,方向盘会动摇,车可能会拉到一边开始抓住。后者经常出现症状后很长一段时间你开始听到磨削噪音。
在这种情况下你不应该让你的车辆。立即联系修理工。更换车轮轴承是一个复杂的修复,应该由一个专业。
穿悬架组件
在你的汽车的一生,大部分的暂停将需要更换。无论是冲击或struts、球关节,控制武器或衬套,所有组件磨损。当他们成为穿,他们往往会转变或倾斜到一边,特别是在刹车,导致汽车拉到一边。
例如,一个破损的控制臂衬套将刹车应用时,导致车辆大幅拉。悬架部件往往磨损缓慢,所以可能你可能没有注意到,直到他们真正打破。
悬架是汽车的重要组成部分的安全系统,你不应该开车损坏或磨损部件。年度检验你的悬架可以帮助避免意外。
穿转向连杆
转向横拉杆球铰接头疲软会导致方向盘转向一边或另一边而转动。如果它变得极其糟糕,方向盘可以从一边到另一边猛烈的抖动。新汽车使用一个齿条和小齿轮系统,有时会服务。老款汽车用转向箱和连接系统是有用的。
损坏或严重损坏转向连杆是极其危险的,因为它可能导致失控的方向盘。如果你怀疑这些症状,有由机修工检查车子。
转矩控制
转矩控制是当车拉到一边的车开始加速。这个条件的可以有多个原因。有时,宽松转向组件是罪魁祸首。其他时候,破碎的电动机是原因。拉杆太松懈,没有下控制臂衬套或球形接头与过量的运动都可以引起这个问题。
你可以测试这个问题,把你的车放在中性和它在街上滑行。如果拉滑行时不会发生,你对齐可能不是问题,转矩控制可能的来源问题。
顶级移动机械将来到你的家或办公室决定把问题的原因和来源,并将提供一个详细的检验报告,包括的范围和必要的维修成本。
一辆汽车不安全操作条件下拉到一边。不管它是一个刹车问题,暂停的问题,或坏的车轮轴承,这些维修需要一个专业的专业知识。订一个机修工尽快进行彻底检查。
我们的服务团队可以一周7天,周一——周五从早上6点到下午5点太平洋标准时间,周六,周日早上7点-下午4点PST。