问:程序取代低球关节和防倾杆链接和扭矩所有前端组件的规范

嗨。更换球关节需要提高车辆和把它放在杰克站。拆卸轮胎、卡钳和刹车转子。然后把杰克下控制臂和删除开口销,从降低球形接头螺母。降低杰克一些点击控制臂与死亡一击锤和较低的控制臂应该脱离方向盘转角。然后取出螺栓,弹簧支撑下控制臂。这将使控制臂自由。然后取出螺栓,控制臂汽车的框架。然后把杰克和删除下控制臂。然后你可以弹出球关节和流行的新一。 Install the lower control arm and put the bolts in the frame and tighten them up to spec. Then put the bolt in the spring and hook it into the control arm and tighten up the bolt to spec. Jack up the lower control arm and allow the ball joint to fit into the wheel knuckle. Tighten the nut down to spec and put in a new cotter pin. Put on the rotor, caliper, and wheel. Torque the lug nuts to spec. Lower the vehicle to the ground.请点击这里查看车辆规格。如果你需要进一步的帮助与替换下控制臂球关节,然后寻找一个专业的,比如从你的机械师,来帮助你。