Hello - while you could re-use the torque converter (both cars use the AODE 4-speed transmission), I wouldn't. Lots of reasons - if the old transmission self-destructed, there is virtually NO chance to get any debris captured in the old...
你好呀。The torque converter clutch code has came on for the input shaft sensor has picked up a different speed when the engine is running. The clutch is slipping in and out of lock. Check the transmission fluid and...
你好呀。The noise you are hearing could be the torque converter (automatic) or clutch (manual). The part could be loose or have a balance issue causing the part to move around and make some sort of noise. If the...
你好呀。The torque converter is at an angle and is not aligning up properly. Remove the starter if you have not done so and bar the flex plate over to turn the engine slowly. When you see the bolt...
你好呀。The issue with the steering being hard seems to be with the pump still having air in it. Start the engine and open the bleed valve slightly. Turn the steering wheel several times from left to right and...
你好呀。A worn torque converter will not cause the transmission to just loose the top gears only. A worn torque converter will cause the transmission to not drive or to have a lack of power to the wheels. The...
你好呀。The code is coming up for the torque converter clutch (TCC) is not working. Check the TCC fuse and see if it has blown. If the fuse is good, then the solenoid on the transmission that controls the...
Either you have a blocked exhaust like a bad converter, a muffler clogged from a broken up converter, or you have a bad ignition module or fuel pressure problem. First try replacing the fuel filter (//m.whoreclub.com/services/fuel-filter-replacement) to see if it...
