Q: When I press on the gas, it feels like it's pulling and making a grinding noise..i drive a 2006 Buick Ranier, what could be causin

asked byMarch 14, 2017

我开了2006年别克·雷纳(Buick Rainer),当我按下气体时,感觉就像在拉动它,也发出了轻微的磨损。当它开始时,但是在公园里有时RPM 10000的东西在1到2之间。这可能导致这一点?

My car has 105 miles.
My car has an automatic transmission.

Wheel Bearings Replacement $110.89 - $591.42 获取报价
Car is making a noise Inspection $94.99 - $114.99 获取报价

Hi there. In most cases, when the car pulls to one side and you hear a grinding noise as the car accelerates, it is caused by a wheel bearing that is beginning to fail. Wheel bearings enable wheels on a car to spin freely and stay secured to the car. Cars have four wheel bearings, one located at each wheel. If the车轮轴承磨损, you will feel the wheels and steering wheel shake, hear a grinding noise or cause the car to pull to one side. It’s also possible that a different suspension component or the CV axle is causing this problem. Due to the multiple possibilities, it’s a good idea to have a professional mechaniccomplete a car is making a noise inspection,因此他们可以测试驾驶您的车辆并查明此问题的来源,以便进行正确的维修。

The statements expressed above are only for informational purposes and should be independently verified. Please see ourterms of servicefor more details

Get an instant quote for your car

我们的认证力学来找您・以12万博亚洲客户端个月,12,000英里的保证为支持・公平和透明的定价manbet1


经验丰富的机械师?

赚取最多$ 70/小时

别人在问什么

MAF传感器和P010B代码的问题
The vehicle's Engine Control Module (ECM) (//m.whoreclub.com/article/symptoms-of-a-bad-or-failing-engine-control-module-ecm) may need reprogramming, as to a technical bulletin ITB09-028 dated June 3, 2009. The reprogramming by the dealer will be needed to try and see if the code goes away, if not, further...
燃油泵不在
You say you are getting battery power and ground to the fuel pump but the pump is not coming on? If this is the case, then the pump connector is bad. There is a technical bulletin (http://www.airtexproducts.com/Resources/TSB/TSB-1010-01_ATX.pdf) that the connector...
Occasional high revving
你好。Thanks for writing in about your 2013 Nissan Cube. I would suggest having idle air control valve tested and the operation of the pedal position sensor checked with a scan tool or multimeter. It sounds like the idle air...
Wheel stud replacement
Nothing is impossible to remove. It might be a pain in the neck and require specialized tools. If you fill out a repair inquiry specifying whether it is the lug nut that is stuck or whether you are actually trying...
ABS light comes on sporadically and the right rear suspension shock absorber is leaking.
你好。Best first step would be to get an ABS scanner hooked up and extract the problem codes from the ABS system. This may be as simple as a malfunctioning wheel speed sensor (//m.whoreclub.com/services/wheel-speed-sensor-replacement). In N. America, this model (badged...
Driving with battery indicator light on
The charging system light (//m.whoreclub.com/services/battery-light-is-on-inspection) is on most likely due to the alternator is not recharging the battery. As you drive it you may loose all power and vehicle will stall. I would recommend having a mobile mechanic like one...
My third break light comes on when I apply the brake pedal, but my two main brake lights dont
你好。感谢您的写作。工作刹车灯被称为中央高架停车灯。它与普通制动灯的连线方式不同,以防止它们一次出门。这...
不小心将转向液放入制动液中
嗨:您将要尽快冲洗制动液管;由于动力转向液和制动流体是不同类型的液压流体,该液压流体设计用于不同的基于液压的系统。您可以联系一个...
以前的所有者抢走了OUF公园的抢购者,现在Shifter不会回到Park Var将无法开始2007 CADILLAC
您好,谢谢您的写作。该车辆的设计仅在车辆在公园中时才开始。这是这样一旦开始就不会立即移动的。在解决问题时,您是...

Related articles

A Buyer’s Guide to the 2011 Buick Lucerne
2011年标志着别克·卢塞恩(Buick Lucerne)的最后一年,这是一款古老的全尺寸轿车,可在内部提供足够的空间。该汽车的内部空间和行李箱空间很大,尽管它...
2012年别克Regal的买家指南
2012年的别克富豪绝对不是过去的祖父母的祖父母。这款中型轿车具有许多现代功能,从发动机开始,一直延伸到...
How to Get Buick Dealership Certified
GM/Buick car dealerships offer automotive technician jobs to mechanics who are certified through the Universal Technical Institute (UTI) and GM.