Q: I'm trying to replace the engine coolant temp sensor on my 2007 ford fusion sel 3.0l v6. How do I install it? It doesn't seem to b

The sensor is held in place by a spring steel clip. Normally, pliers are needed to pry the retaining clip out. The new sensor should seat square to the bore in the cylinder head. If the sensor is sitting square in the bore you can push the clip in by hand. If you cannot get the sensor to fully seat and replace the retaining clip, it is possible that the o-ring got twisted or damaged. O-rings should be lubricated with engine coolant to aid assembly. If you need assistance, please requestcoolant temperature sensor installation经过认证的机械师将为您解决此问题。如果您有其他疑问或疑虑，请随时重新接触万博体育入口因为我们一直在这里为您提供帮助。